California Minimum Wage Increases January 1st

In 2016, California passed legislation to increase the State minimum wage to $15 per hour over time. Under the provisions of that law, California’s minimum wage will increase on January 1, 2021 to $14 per hour for employers with 26 employees or more and $13.00 per hour for employers with 25 or fewer employees.

Below is the mandated schedule to raise the State minimum wage to $15 by 2023. Please note that some cities and counties have a local minimum wage that is higher than the state rate.

The change in the minimum wage has a domino effect on other California employment compliance areas that are linked to the state minimum wage. Many of the exemptions afforded to construction employers’ signatory to a collective bargaining agreement (CBA) are dependent on the CBA providing for “premium” wage rates.  The following are some of the key areas the minimum wage increase may impact construction employers.

Collective Bargaining Agreements – Hours and Days of Work

Under California Industrial Welfare Commission Wage Order 16, construction employers and unions are permitted to bargain hours and days of work different from those required by the Wage Order, so long as their employees are covered by a valid CBA designating wages, hours and working conditions and the employees’ regular hourly rate of pay is not less than 30 percent more than the state minimum wage.  Employers should determine whether their union agreements or other procedures are affected.

Paid Sick Leave

Construction employers in California must provide paid sick days to their employees unless the employees are covered by a valid CBA and fall under the exemptions included in Labor Code Section 245.5.  The construction exemption to California’s paid sick leave law requires that a premium regular hourly rate of pay of not less than 30 percent more than the state minimum wage be paid to exempt employees.

Tools or Equipment

Employers who require employees to provide their own tools or equipment may also be affected pursuant to the Industrial Welfare Commission Wage Order 16. Generally, when tools or equipment are required by the employer or are necessary for the performance of a job, they must be provided and maintained by the employer. However, an employee receiving wages that are at least two times the state minimum wage can be required to provide and maintain their own hand tools and equipment customarily required by the trade or craft. If employers are taking advantage of this provision, they should ensure they are paying employees twice the new state minimum wage.

Recent Posts

Introduction to AutoCAD, Revit and BIM 360

Join us to learn about Autodesk’s BIM software solutions. BIM is a method of tying together and managing project information through the use of 3-dimensional modeling, databases, and intelligent components. In this introductory course, Jason Gant, an Architectural BIM Manager…

April 23, 2024

SCGMA Event – Open Session

Join us to learn more about Association happenings – trust fund updates, industry updates, man hour updates, and more. Date: Thursday, May 23, 2024 Time: 8:00am – 8:30am Location: Via Zoom Tentative agendas for these Open Sessions may include: Glazing Work…

April 16, 2024

SCGMA YPG Microsoft Project Level 1 Course – Lesson 4

Join us for our fourth lesson of Microsoft Project Level 1 Course taught by Microsoft Certified Professional, James Law. This lesson will continue the training on managing project resources including entering costs, assigning resources to tasks, and resolving conflicts. The…

April 4, 2024

SCGMA YPG Microsoft Project Level 1 Course – Lesson 3

Join us for our third lesson of Microsoft Project Level 1 Course taught by Microsoft Certified Professional, James Law. This lesson will cover managing tasks by creating a work breakdown structure, defining task relationships and scheduling tasks. This lesson will…

April 4, 2024

SCGMA YPG Microsoft Project Level 1 Course – Lesson 2

Join us for our second lesson of Microsoft Project Level 1 Course taught by Microsoft Certified Professional, James Law. This lesson will provide training on defining a project by creating a new project plan, setting project options and assigning a…

April 4, 2024
MORE STORIES