Cal/OSHA COVID-19 General Guidelines and Management Plan

General Guidelines

In May 2020 Cal/OSHA issued its “Interim General Guidelines” on Protecting Workers from COVID-19. Cal/OSHA’s regulations require protection for workers exposed to airborne infectious diseases such as the coronavirus disease (COVID-19). The new guidance identifies specific infection control measures that are mandatory for California employers to implement and include in their Injury and Illness Prevention Program (IIPP) as required by 8 CCR §3203 and 8 CCR §1509 (construction). This Cal/OSHA guidance does not impose new legal obligations to employers.

According to Cal/OSHA’s COVID-19 general guidelines employers are required to determine if COVID-19 infection is a potential workplace hazard. Given its widespread transmission throughout the community COVID-19 is a likely workplace hazard. Therefore, Cal/OSHA makes it mandatory to adopt changes to employer’s IIPP that implements COVID-19 infection control measures. Infection control measures may vary by workplace. Cal/OSHA advises if COVID-19 is a workplace hazard, then employers must implement infection control measures, including applicable and relevant recommendations from the Centers for Disease Control and Prevention (CDC), Interim Guidance for Businesses and Employers to Plan and Respond to Coronavirus Disease 2019 (COVID-19), and Coronavirus Disease 2019 (COVID-19): How to Protect Yourself & Others. Employers may adopt a written COVID-19 Management Plan and make it a part of the IIPP. This may be done by adding an addendum to the IIPP.

At a minimum, the COVID Management Plan should contain the following general components:

  1. Measure aimed at minimizing the spread of sick employees
    • Encourage sick employees to stay home
    • Ensure employees who are out ill with fever or acute respiratory symptoms do not return to work until both of the following occur:
      • At least three full days pass with no fever (without the use of fever-reducing medications) and no acute respiratory illness symptoms; and
      • At least 10 days pass since the symptoms first appeared.
  2. Utilize administrative and safe work practices as applicable
    • Practice physical distancing and maintaining a distance of at least 6 feet between persons at the workplace when possible.
    • Provide employees with cloth face covers or encourage employees to use their own face covers for use whenever employees may be in workplaces with other persons. Cloth face coverings are not personal protective equipment (PPE), but combined with physical distancing of at least six feet, they may help prevent infected persons without symptoms from unknowingly spreading COVID-19.
  3. Establish procedure to routinely clean and disinfect commonly touched objects and surfaces such as elevator buttons, handrails, faucets and doorknobs.
    • Surfaces should be cleaned with soap and water prior to disinfection.
    • Use disinfectants that are EPA-approved.
    • Provide disposable wipes for employees to wipe down commonly used surfaces before use such as shared tools.
  1. Cal/OSHA IIPP regulations require employers to provide employees with training on new workplace hazards. This would include COVID-19. The training must be provided in a language that is readily understandable to all employees. Training may be part of “toolbox” or “tailgate” safety meetings. Topics should include:
    • General description of COVID-19, symptoms, when to seek medical attention, how to prevent its spread, and the employer’s procedures for preventing its spread at the workplace.
    • How an infected person can spread COVID-19 to others even if they are not sick.
    • How to prevent the spread of COVID-19 by using cloth face covers, including: o How cloth face covering can help protect persons around the user when combined with physical distancing and frequent hand washing.
      • Instructions on washing and sanitizing hands before and after using face coverings, which should be washed after each shift.

 

 

Management Plan

SCGMA’s consultant has prepared the following COVID-19 Management Plan for use at your company facility and/or jobsite locations. Please complete this form by filling in your company specific information where indicated.

Access the SCGMA COVID-19 Management Plan fillable form here.

Recent Posts

SCGMA Technical Bulletin – Glass Railing Fundamentals

Glaziers have increasingly been expected to include glass railings in their bid scope of work.  This development is largely due to the increase in the types of glazed railing applications, the standardization of the railing systems and the need for…

September 10, 2026

SCGMA NFRC Compliance Webinar

Join us for an overview of NFRC compliance, thermal performance, and the role of thermal modeling in California’s energy code. John Gordan of WESTLab will discuss thermal heat loss in fenestration systems, the importance of edge-of-glass performance, and the International…

September 10, 2026

SCGMA YPG Bluebeam Max Hands-on Training

Join us for a hands-on, interactive training on Bluebeam Max. Designed for Project Managers and Estimators, this training will explore Bluebeam Max features that can help streamline document setup, drawing review, markup management, revision tracking, and more. Attendees will work…

September 8, 2026

SCGMA CA Employer Guide to AI Webinar Presented by Littler

The AI boom has arrived, and so have the regulators. AI is no longer the Wild West. As state legislatures across the country enact new laws governing artificial intelligence, businesses face a rapidly expanding patchwork of compliance obligations across industries….

August 25, 2026

SCGMA Claude AI Training Series

Join us for a four-part virtual Claude training series designed specifically for contractors. Led by AI consultant Kelly Stephens, this practical, construction-focused series will take participants from the fundamentals of Claude and AI safety to prompting for everyday work, building…

August 25, 2026
MORE STORIES